Precision Wireforms & Presswork
Why choose Stockton Engineering for presswork and wireforming? Any shape any size, we’ll find the right solution for your manufacturing and delivery needs.
Custom Compression Springs From 0.1mm to 25mm wire
Compression Springs are the most common coiled spring, with open coils that when compressed will push back to it’s free length. The compression spring is used in countless applications from pens to valves and in most
Custom Extension Springs From 0.1mm to 25mm wire
Extension Springs are closed coil springs that have hoops at each end, these ends are attached to the application and when pulled apart, the springs stored energy forces the spring back to the closed position. One of the simplest examples of an exte
Custom Torsion Springs From 0.1mm to 25mm wire
Torsion Springs are close wound springs that have mandrels at each end, these ends attach to an application and when the parts of the application move around the spring, the springs stored energy forces the mandrels back to the set position.
Custom Flat Springs & Clips From 0.1mm to 6.35mm
Flat Springs & Spring clips are normally stamped from sheet metal, bent into form and then heat treated. This allows for the metal to store energy and act like a conventional spring. This energy is released when the restraining force is removed.
Custom Wire forms – wire forming From 0.1 mm to 25 mm
Wire forming can produce simple hooks/brackets all the way through to incredibly complex designs within applications. Dependent on the design, the wire shapes can be produced by machines or more traditional methods. The only limitation is imagination